How Much Does a Used HOWO Cargo Truck from China Cost for Construction Material Transport?

A used HOWO cargo truck from China typically costs about FOB USD 17,000–28,000 for construction material transport. The right purchase is the unit whose payload, cargo body, mechanical condition, refurbishment scope, and shipping term match the job. Buyers should compare total landed cost and inspection evidence before approving a quotation.

1. What Is the Typical Price Range of a Used HOWO Cargo Truck from China?

A practical export screening range for a refurbished used HOWO cargo truck is about FOB USD 17,000–28,000 per unit. A standard 6x4 truck normally sits toward the lower or middle part of the range, while an 8x4 unit, stronger body, better tires, or deeper mechanical refurbishment moves higher.

For construction delivery, price should be tied to the actual work. A truck carrying bagged cement on paved routes does not need the same specification as one hauling steel, blocks, timber, and mixed materials on rough site roads. Buyers comparing used HOWO cargo trucks for construction delivery should compare like-for-like configurations.

2. How Do Model Year, Mileage and Refurbishment Level Affect the Purchase Price?

Model year and mileage influence price, but verified mechanical condition should carry more weight than either number. Two trucks from the same year can differ sharply in value if one needs a clutch, tires, brake work, batteries, or cargo-floor repair while the other has already passed those repairs.

Mileage should be checked against cab wear, pedal wear, engine behavior, chassis condition, and available records. A low odometer reading on a heavily worn truck is not a reason to pay more. The strongest premium is justified by documented repair work, road-test evidence, tire condition, and a clear list of replaced parts.

3. How Do 6x4, 8x4 and Cargo Body Specifications Affect the Price?

A 6x4 HOWO cargo truck is normally the cost-efficient choice for regular construction deliveries, while an 8x4 costs more because it adds an axle, suspension components, tires, chassis weight, and payload capability. The correct choice depends on material density, road limits, loading method, and route condition.

Body specifications also move the quotation. A longer floor, reinforced crossmembers, higher sideboards, new stake panels, or a replacement body all add fabrication cost. Buyers still comparing vehicle types can review the refurbished HOWO truck range before deciding whether a cargo truck, dump truck, or tractor-trailer combination better fits the material flow.

4. What Payload and Cargo Body Configuration Fits Construction Material Transport?

The right payload and body are determined by the material, not by the cheapest available chassis. Bagged cement, bricks, blocks, tiles, timber, steel, pipes, scaffolding, and formwork impose different demands on body length, side support, floor strength, tie-down points, and axle loading.

For a typical 6x4 construction-delivery truck, a 20–25-tonne working requirement and a body around 7.6 m can suit mixed building materials where local axle and road rules permit. Long steel or timber needs usable deck length, while dense cement or blocks place more pressure on suspension, tires, brakes, and load distribution.

5. What Should Be Included in an FOB, CFR or CIF Truck Quotation?

A comparable quotation must identify the truck, Incoterm, named port, refurbishment scope, and included export costs. A low headline figure is not useful if the buyer cannot tell whether tires, repairs, freight, insurance, export documents, or loading preparation are included.

Under Incoterms® 2020, FOB, CFR, and CIF allocate transport cost and risk differently for sea and inland-waterway shipments. A used-truck quotation should state chassis configuration, horsepower, steering side, cargo-body dimensions, tire condition, repair items, shipping method, loading port, destination port, and validity. This makes supplier comparisons commercially meaningful.

6. How Much Do Shipping, Import Duties and Destination Charges Add to the Landed Cost?

Landed cost should drive the final buying decision because the FOB truck price is only one part of the project budget. Ocean freight changes with vehicle dimensions, destination, vessel space, and shipping method; duty, VAT, inspection, registration, port charges, and inland delivery vary by country.

Use this calculation:

Landed cost = vehicle price + freight + insurance + destination charges + import duty and tax + clearance + registration or inspection + inland delivery.

Compare quotations to the same destination port and Incoterm. A USD 2,000 lower FOB offer can disappear if the truck needs immediate tires, repairs, or a more expensive shipping arrangement after purchase.

7. What Should Buyers Inspect Before Paying for a Used HOWO Cargo Truck?

Payment should follow evidence that the truck can carry construction materials safely, not exterior paint or yard photos. The highest-value checks are engine condition, clutch and gearbox performance, chassis integrity, suspension, brakes, tires, cargo-floor strength, sideboard locks, and electrical function.

Construction work deserves extra attention around the main frame, subframe, crossmembers, spring hangers, U-bolts, cargo-floor supports, and tie-down points because repeated payload and rough roads concentrate stress there. Buyers can use this construction-material cargo truck inspection case as a reference for a 6x4, 371 HP, approximately 7.6 m-body configuration.

Where appropriate for the specific WD615 engine, balanced compression around 26–28 bar can be used as a screening reference rather than a universal acceptance value. The road test should also confirm clean shifting, clutch grip, steering stability, air-pressure recovery, and controlled braking.

Qingdao Alston Motors’ position is clear: a used HOWO cargo truck price is acceptable only when it is linked to a specific chassis, agreed refurbishment scope, verified mechanical condition, and final test evidence before shipment.

Related video: Refurbished Used HOWO 8x4 Cargo Truck Test | Engine Start and Inspection

8. How Do Maintenance, Spare Parts and Downtime Affect the Total Cost of Ownership?

Total cost of ownership can overturn a price comparison when a cheaper truck enters service with deferred repairs. Tires, filters, lubricants, brake parts, suspension wear, batteries, clutch components, cooling-system parts, and scheduled servicing should be considered before purchase.

Downtime matters in construction supply. If one truck makes several cement, block, steel, or timber deliveries each day, an avoidable clutch, cooling, or brake failure can delay material flow. Qingdao Alston Motors separates mechanical refurbishment from cosmetic work for this reason. Buyers can review Qingdao Alston Motors’ refurbishment and export process when assessing supplier preparation.

9. What Information Should Buyers Provide to Get an Accurate Truck Quote?

An accurate quote requires the supplier to know payload, material type, body requirement, route, destination, and shipping term. Asking only for the “cheapest HOWO cargo truck” encourages a price comparison before the working specification is defined.

Provide expected payload, main materials, longest item carried, preferred 6x4 or 8x4 configuration, body length, sideboard style, LHD or RHD, road surface, daily distance, destination country and port, and whether FOB, CFR, or CIF pricing is required. A 20-tonne cement delivery truck on paved roads should not be priced against an 8x4 prepared for steel, timber, and rough-site work.

Once those requirements are fixed, buyers can request a construction cargo truck quotation based on the actual job instead of a generic stock price.

Frequently Asked Questions

How much is a used HOWO cargo truck from China?

A practical export screening range is about FOB USD 17,000–28,000, depending on configuration, body specification, mechanical condition, tires, and refurbishment scope.

Is 6x4 suitable for construction material delivery?

Yes. A 6x4 is practical for many cement, block, timber, steel, and mixed-material routes when payload, road conditions, and axle limits fit the chassis.

When should I choose 8x4?

Choose 8x4 when payload, body size, or duty cycle exceeds the suitable working range of the selected 6x4 configuration.

Is CIF the same as total landed cost?

No. CIF normally does not include every destination charge, import tax, customs fee, registration cost, or inland delivery expense.

Should I buy the lowest FOB offer?

No. Compare refurbishment scope, mechanical condition, tires, cargo-body structure, shipping cost, inspection evidence, and immediate repair requirements first.

What should be checked before payment?

Verify chassis identity, engine, clutch, gearbox, brakes, suspension, tires, cargo body, electrical system, agreed repairs, and road-test evidence.

What details are needed for an accurate quotation?

Provide payload, material type, body size, drive configuration, steering side, road conditions, destination port, daily route, and preferred FOB, CFR, or CIF term.

Written by: Bruce Li, Export Consultant

Reviewed by: Alston Motors Export & Technical Team

Company: Qingdao Alston Motors Co., Ltd